Automotive Manual PDF

Park/Brake:
1. Unplug 3 connections from back of factory tail light
2. Connect to LED tail light with the following configuration:
Green/Black - Black (Ground)
Green - White (Brake)
Black - Red (Park)
Note: Color may differ on various years. If the configuration is not correct simply swap the wires around until the tail light functions properly.
(more…)

[Read more →]

1. Park the vehicle on a clean, flat surface and block the wheels for safety. Place automatic transmissions in park and manual transmissions in neutral.
2. Remove the negative battery cable first, then the positive battery cable. If equipped, the Supplemental Restraint System will be deactivated when the battery is disconnected.
3. Measure and record the space between the bumpers and the body as well as the space between the cab and the bed for reference during installation of the kit.
(more…)

[Read more →]

1. Remove positive and negative battery cables. If equipped, the Supplemental Restraint System will be deactivated when the battery is disconnected.
2. Note the location of the front and rear bumpers in relation to the front/rear of the vehicle for use in alignment during installation.
(more…)

[Read more →]