Performer series intake manifolds are compatible with aftermarket camshafts and headers designed to operate in the idle-5500 RPM range. Edelbrock offers a dyno-matched, street proven camshaft; Performer-Plus #2172. Header primary tube diameter should be 1-5/8” depending on your specific engine combination.
(more…)
351 C.I.D. Ford Cleveland V8 Non-EGR Engines Performer 351-4v Installation Instructions
August 22nd, 2009 · No Comments
2003 Dodge Cummins ATS Co-Pilot Module Installation Manual
January 11th, 2009 · No Comments
The ATS Co-Pilot module commands the lock-up clutch of the torque converter along with the exhaust brake, if equipped, to stay engaged. This allows for up to 100% of the retarding force to be transferred in 3rd and 4th gear and the transmission oil temperature to remain low because of little to no slippage occurring when the converter is in these selected gears. When the ATS Valve Body is installed, you can use engine braking in the low-speed position of nearly 12 mph in 1st or 2nd gear.
(more…)
1996-1999 E36 Supercharger With C38 Blower Instructions
October 9th, 2008 · No Comments
Operating Instructions for AA supercharged cars
Always allow your engine and supercharger to warm up for at least one minute before placing the car in gear. In colder weather (below 50 degrees Fahrenheit), we recommend at least two-to-three minutes of warm-up time.
(more…)
