Front / Rear & Poly Spring Pads (PSP’s)
The SSA10 springs do NOT have a specific left or right side; however, they do have a specific front / rear side. Position the two-hole shackle to the front and the three-hole shackle to the rear. PLEASE NOTE: Two sets of PSP’s are included with these springs. The larger set is for Ford applications; the smaller set is for GMC and Dodge applications. See page three of these instructions for more details
(more…)
SuperSprings Model # SSA10 Installation Instructions
October 26th, 2009 · No Comments
OmniTrac Brake Control Installation Guide
July 24th, 2009 · No Comments
Drilling or use of longer screws may damage unit.
1. Securely mount bracket to a solid surface.
2. Insert supplied #6 x 3/8″screws on each side into the mounting holes.
3. Adjust control to desired position and tighten screws until snug.
4. Once the brake control is securely mounted, point the Internal Sensor Adjustment Arm down to the ground.
(more…)
