Automotive Manual PDF

RSS Feed

The Resources for Automotive

Muz Honda JDM Badges (S2000) Installation Instructions

November 24th, 2009 · No Comments

1) Use an adhesive solvent to spray the badge you are removing. Make sure you use an adhesive solvent (such as Xenit Adhesive Remover) that won’t damage the paint.
2) Once the solvent has penetrated the backing of the badge use a length of dental floss and gently work it under the edge of one of the top badge corners. Once you have the floss behind the badge you can use it like a saw in a back and forth motion to gradually ‘cut’ through the backing adhesive and separate the badge from the body of the car. You may need to repeat the procedure from various angles to achieve this.
(more…)

[Read more →]

TUbliss Installation Instructions

November 2nd, 2009 · No Comments

First time installation will require drilling a 10mm hole in your rim. After the TUbliss Core is installed on the rim, it stays on the rim. It’s not necessary, nor recommended, to remove it when changing tires. We recommend installing TUbliss on new tires that have never been mounted. OEM rim locks leave impressions on the inside of your old tire and any tears or damage from a previous installation may cause leaks or other problems.
(more…)

[Read more →]

Ford Timing Set Installation Instructions

April 28th, 2009 · No Comments

Thank you for choosing COMP Cams® products! We know you have options in valve train component selection and we are proud to be your manufacturer of choice. Please read this instruction sheet carefully before beginning installation, and also take a moment to review the included limited warranty information.
(more…)

[Read more →]