Automotive Manual PDF

STEP 1. Remove the contents from the box and check for any damage. Verify all parts against the parts list. Read and understand instructions completely before beginning installation.
STEP 2. Measure, and mark clearly, from the front of pinch weld towards the rear of vehicle for bracket positions. Suggested locations at 14 1/2”,33 1/4”, 49 1/2” and 61 1/2”.
STEP 3. Drill 5/16” holes as marked on pinch weld. Drill each hole in pinch weld so they are centered vertically.
STEP 4. Under the vehicle near the first 2 hole locations you will see 2 black body plugs, remove these
(more…)

[Read more →]