Before servicing propeller, be sure the engine is in neutral with ignition off or disconnected to avoid any possibility of the engine starting and causing injury.
Do not install any propeller without a thrust washer in place. If a thrust washer is not used, severe damage could occur to the propeller and/or engine drive.
(If you have any questions, please contact your Dealer or call our Customer Service Department.) For Yamaha® and Honda® outboards:
(more…)
Yamaha & Honda MasterGuard Hub Kit 12 Installation Instructions
November 13th, 2009 · No Comments
The Edge Advanced Suspension Instruction Sheet
August 18th, 2009 · No Comments
This Kit must be installed with THE EDGE 4.5” HANGER KIT (part no.3-4000) or THE EDGE 6” FRONT SPRING KIT (part no.3-6000) or THE EDGE 8” FRONT SPRING KIT (part no.3-8000).
- Front Driveshaft for 8” Front Spring kit must be modified.
INSTRUCTIONS:
1. Jack up the front end of the truck and support the frame at the front frame rails with jack stands. NEVER WORK UNDER AN UNSUPPORTED VEHICLE. Remove front tires.
(more…)
