Acura TSX Figure Grille Installation
1) PREPARATION
1.1) Remove the OEM fog light grilles, if this item was purchased. The stock fog light opening covers are held in place with spring clips attached to the cover. Work a finger between the cover and the bumper, and pull outward to release the cover.
1.2) The lower center grille is not removable; it is bonded to the bumper, and it will be left in place.
(more…)
2004-2005 Acura TSX Figure Grille Set Installation Manual
November 10th, 2008 · No Comments
Installation Instructions for FORD FOCUS
March 7th, 2008 · No Comments
Tools & Materials Needed: 1. Utility Knife 7. Crank Spring Removal Tool 2. Wire Crimper (Special Tool, available at most 3. Torx™ Wrenches Auto Parts Stores) – or – 4. Hex Nut Drivers 8. Flat Screw Drivers (2) 5. Drill and Bits 9. Add-A-Circuit™ fuse adapter 6. Phillips Head Screw Driver 10. Silicon Sealant (Clear or Black) A. Removing the Door Panel Coverings 1. For ease of installation, do both sides at the same time. 2. Roll the windows to approximately 1/2 open, and so the crank handle is in the Down Position. With either the Crank Spring Removal Tool, or a flat Screwdriver, remove the spring, located in a slot on the back of the crank.
(more…)
