Automotive Manual PDF

Installation Instructions Front
1. Raise vehicle and place jack stands under frame approximately 3” behind front spring shackles. Remove front wheels and shocks.
2. Remove one rivet from the outside of the frame at the engine cross member closest to the OE hose to steel line connection. Attach the 90 degree brake line extension brackets using the 3/8” x ” bolts, nuts, and lock washers.
3. Disconnect front brake line at frame and reroute through extension brackets and secure. CAUTION: Careful attention must be exercised in rerouting. Do not kink, pinch or stretch lines! When both sides have been completed, bleed the brakes. Refill the master cylinder with Dot ap- proved fluid.
(more…)

[Read more →]