Automotive Manual PDF

We encourage you to read this manual thoroughly before you begin work, for a few reasons: A quick parts check to make certain your kit is complete (see shipper parts list in this manual). If you discover shipping damage or shortage, please call our office immediately. Take a look at exactly what you are going to need in terms of tools, time, and experience.
(more…)

[Read more →]

Please take a few moments to review this manual thoroughly before you begin work: Μake quick parts check to make certain your kit is complete (see shipper parts list in this package). If you discover shipping damage or shortage, please call our office immediately. Take a look at exactly what you are going to need in terms of tools, time, and experience.
(more…)

[Read more →]

Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury. After relieving the system pressure, a small amount of fuel may be released when servicing the fuel lines or connections. In order to reduce the risk of personal injury, cover the regulator and fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may leak out.
(more…)

[Read more →]

Magna Charger has seen a variance in stock rear wheel horsepower. Numbers between 280 RWHP and 320 RWHP have been recorded on our in-house chassis dynamometer. Depending on year, transmission, or presence of other installed aftermarket products, RWHP numbers of up to approximately 450 at 7 lbs. of boost can be achieved with the installation of the Magna Charger Corvette intercooled supercharger system. Horsepower numbers are reflected by base RWHP numbers and altitude. Magna Charger systems are manufactured to produce about 20 RWHP per pound of boost at sea level. High altitudes will produce different numbers.
(more…)

[Read more →]

You have made an important decision and we commend your choice. We’re confident you’ll be happy with the ease of installation and the outright performance improvement of this bolt-on Magna Charger kit.

Our parent company, Magnuson Products, is the exclusive aftermarket supplier for all Eaton superchargers; therefore our products are built to OEM standards for function and durability. Your kit has been thoroughly tested and carries California Air Resources Board EO # (N/A at this time)
(more…)

[Read more →]

You have just purchased a Kazuma Supercharger System for your Toyota Land Cruiser. After installing this kit, we know you will enjoy the benefits this product has to offer for many miles to come. If you’re planning to operate your supercharged Land Cruiser on the street, you must not make any modifications to the system as delivered nor to the installation methods/procedures outlined in this document in order to maintain any warranty or emission certification.
(more…)

[Read more →]

Our Magna Charger kits are designed for stock engines, with stock components, in good mechanical condition only. Installation on worn or damaged engines is not recommended and may result in engine failure, for which we naturally can’t be responsible . Magna Charger is not responsible for the engine or consequential damages.
(more…)

[Read more →]

DO NOT try to run the vehicle at full throttle at sea level altitude with a supercharger unless the fuel tank is filled with good 91-octane fuel. Failure to heed this warning can result in severe engine damage. Special Note: If you do not have a factory workshop manual, buy one now! It is good to have for any repairs now and in the future. The factory manual is available from Helm Publications, 800-782-4356. Tools Needed: 8, 10, 11 (7/16”), 12, 13 (1/2”), 14 (9/16”), 15, 17, sockets and wrenches, a 5mm Allen wrench, Phillips and straight blade screwdrivers, and a telescoping magnet.
(more…)

[Read more →]