STEP 1. Remove the contents from the box and check for any damage. Verify all parts against the parts list.
STEP 2. Read and understand instructions completely before beginning installation.
STEP 3. Determine Driver and Passenger Uprights and Top and Bottom Tubes. (Uprights are positioned so raised side of bolt holes are facing each other and the Tube with the two pierced holes is the Bottom Tube).
(more…)
1999 Chevrolet Silverado Push Bar Assemblies Installation Instructions
October 25th, 2009 · No Comments
MN-126 Air Lift Instructions
August 28th, 2009 · No Comments
If your vehicle is equipped with vibration dampers between the turns of the coil, it is necessary that these be removed before installing the air springs.Their function will be replaced by the air spring. Some mid-size GM vehicles have a solid cup located on the lower spring seat which will not allow the air line to exit the coil. It is necessary to removed this cup before installing the air spring.
(more…)
