Automotive Manual PDF

INSTALLATION NOTE:
• Make sure the vehicle and the nose mask are clean and completely dry before installation. If moisture under the mask is allowed to dry, it may cloud the paint. If the mask gets wet, remove it and allow it to air-dry completely.
• Make sure any repainted surfaces are cured.
• Make sure the hood and nose of the vehicle have been waxed with a high-quality paste wax.
• Make sure you install the nose mask securely. If the nose mask starts to flap, or comes loose while driving, safely pull off the highway, stop the vehicle, and secure or remove the mask.
(more…)

[Read more →]

Installation requires a professional mechanic. Prior to beginning, check all suspension-to-frame attaching points for stress cracks. The overall vehicle must be in excellent working condition; repair or replace all worn parts. Read instructions several times before starting. Be sure you have all needed parts and know where they install. Read each step completely as you go.
(more…)

[Read more →]

Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove throttle body intake assembly.
3. Remove (2) bolts & save from linkage bracket. (Ref. C)
4. Remove (4) bolts from the throttle body. (Ref. D)
5. Remove gasket and clean surfaces.
(more…)

[Read more →]

Installation requires a professional mechanic. Prior to beginning, check all suspension-to-frame attaching points for stress cracks. The overall vehicle must be in excellent working condition; repair or replace all worn parts. Read instructions several times before starting. Be sure you have all needed parts and know where they install. Read each step completely as you go.
(more…)

[Read more →]

This handbook covers current Land Rover Defender models and, together with the Service Portfolio book, provides all the information you need to derive maximum pleasure from owning and driving your new vehicle.
(more…)

[Read more →]

Now that everything is disassembled, cleaned, and bagged in labeled Zip-Locs, it’s time to decide what to replace. Warning: I’m not a transmission specialist – I’m only telling you how I interpreted this. If anyone with more experience can comment on my methods, I would be happy to update this. Carefully inspect all gears and the main drive gear. Check the inside faces for signs of wear or light pits, especially if the bearing that was removed had any wear. Inspect the bearing face on the drive gear at each end.
(more…)

[Read more →]

Towing hitch - electrical mounting parts for BMW 7 Series (E38) | bmw e38 fuse | Technical knowledge is required. Installation time approx. 4-5 hours, which can vary according to the condition and fittings of the vehicle. If the towing hitch has been retrofitted in the Feredal Republic Germany, final inspection is required at the Technical Inspecting Agency (TUV) in accordance with 19 (2) of the German appropriate entry in the car paper is necessary.
(more…)

[Read more →]