The gear indicator comes configured for use with the OEM Suzuki gear position sensor, and is fitted with standard connectors to plug directly into the Suzuki wiring harness. The unit also features the so-called ‘TRE’ modification, which is designed to defeat the gear dependent mapping strategy of the Suzuki ECU. Please refer to the bottom of this document for a description of the TRE function.
(more…)
Suzuki Hayabusa Gear position indicator Geartronics GPI-4 Fitting instructions
October 2nd, 2008 · No Comments
240 Suzuki Hayabusa Swingarm Installation Instructions
October 2nd, 2008 · No Comments
Notes on fitting wide wheel and tire
• An advanced degree of mechanical skill is required to properly install this kit. If after reading these instructions you have any doubts, we strongly recommend that you have a professional install it for you. If you install the kit yourself, we recommend that you also use the applicable shop manual for your motorcycle. This kit involves significant alterations of your motorcycle and may void your factory warranty.
(more…)
Geartronics GPI-4 Suzuki Hayabusa Gear position indicator Fitting instructions
September 29th, 2008 · No Comments
The gear indicator comes configured for use with the OEM Suzuki gear position sensor, and is fitted with standard connectors to plug directly into the Suzuki wiring harness. The unit also features the so-called ‘TRE’ modification, which is designed to defeat the gear dependent mapping strategy of the Suzuki ECU. Please refer to the bottom of this document for a description of the TRE function.
(more…)
