Automotive Manual PDF

INSTALLATION INSTRUCTIONS
1. Park the vehicle on an appropriate work surface. Ensure that the vehicle is in park for automatic transmission or in first gear for manual transmissions and the parking brake is applied. Block the wheels for added safety.
fRont InStAllAtIon
2. Remove the bolt mounting the front track bar to the passenger’s side of the axle (Figure ). Save track bar bolt and nut tab. Allow the track bar to hang free. Note: The track bar bolt may require a T‑50 Torx socket on early models.
(more…)

[Read more →]

INSTALLATION INSTRUCTIONS
1. Park and secure the vehicle on a level hard surface. Block the rear tires to avoid accidental movement.
2. Remove the track rod bolt on the driver side at the frame mount. This is a solid bar that runs from the axle on the passenger side (PS) to the frame on the driver side (DS).
3. Raise the front of the vehicle so the axle is hanging freely and the tires are just off the ground. Support the vehicle with jack stands under the frame rail about 3” behind the front spring.
(more…)

[Read more →]