Automotive Manual PDF

Read all instructions before starting any work.
1. Remove the exhaust system behind the catalytic converter assembly.
2. Grind or file the tab off the outlet end of the O.E. converter. Connect the intermediate pipe to the converter and clamp in place. This pipe will require cutting the outlet for the 133″ WB (standard cab, 8’ box). Cut to length after the muffler is in position (SEE #3).
3. Slip muffler hanger (36161) ends thru the rubber hangers. The clamp should be offset to the driver’s side. Install the muffler. The bracket clamps to the driver’s side outlet. Do not tighten yet.
(more…)

[Read more →]

To begin removal of your OEM exhaust system, you will need to cut the tail-pipes just behind the mufflers. Remove the tail pipes from the OEM rubber insulators. Do not damage the OEM rubber insulators, as they will be re-used with your new system. Next unbolt the extension pipes from the H-pipe and remove the mufflers from their OEM rubber insulators. Do not discard the fasteners required to bolt the extension pipes to the mufflers, as they will be re-used.
(more…)

[Read more →]

When working on under or around any vehicle exercise caution. Please allow the vehicle’s exhaust system to cool before removal, as exhaust system temperatures may cause severe burns. If working without a lift, always consult vehicle manual for correct lifting specifications. Always wear safety glasses and ensure saje work area. Serious injury or death could occur if safety measures are not followed.
(more…)

[Read more →]