Piston must be removed from the Flowrator Distributor Assembly for proper Expansion Valve operation.
To remove piston from Flowrator Distributor Assembly :
1. Loosen the 13/16 nut 1 TURN ONLY, relief pressure. No pressure loss
2. indicates possible leak.
3. Remove the nut and discard the black seal.
4. Remove the check piston and discard.
5. Use a tube cutter to remove the spin closure on the suction line.
(more…)
Expansion Valve Kits XVB18-36C, XVB42-60C, XV18-36C, XV42-60C Installation Instructions
October 26th, 2009 · No Comments
1983-1988 T-Bird MM Caster/Camber Plates
April 5th, 2009 · No Comments
Thank you for purchasing Maximum Motorsports’ Caster/ Camber Plates. Our Caster/Camber Plates are designed to maximize the performance of your T-Bird’s front suspension. You will find many features that set our Caster/Camber Plates apart from the rest:
• The widest range of camber adjustment in the industry: Side-to-side reversible main plates double the camber adjustment with the underhood space limitations for camber slot length.
• Lifetime guaranteed high grade Teflon lined spherical bearings are used at the strut top mounting point. Urethane bushings do not provide positive location, and induce bending loads on the strut that reduce the strut’s lifespan and may even break the strut shaft.
(more…)
