Remove the contents from the box and check for any damage. Verify all parts against the parts list.
Read and understand instructions completely before beginning installation.
Remove 10mm bolts from bumper brace located on back side of front body mount if present. For each side, place Mount Bracket up to the backside of the body mount and secure using existing 10mm bolts removed in step 3. (On trucks without existing bolts, use the 10mm hardware provided in the bolt kit).
(more…)
1998-2000 Chevrolet S10 Blazer Sportsman Assemblies Installation Instructions
October 20th, 2009 · No Comments
C6 Corvette SCIC airbox Magnuson Supercharged Applications installation instructions
September 18th, 2008 · No Comments
Disconnect electrical connector for under hood light & unclip electrical connector for under hood light from the radiator shroud. Disconnect the electrical connector from outside air temp sensor located low on the right side of the shroud. Remove the 2 “christmas tree” push fasteners holding the radiator shroud to the condenser. They are located approximately midway up along each side. Raise front of vehicle, follow manufacturer instructions. Use jack stands to support vehicle.
(more…)
