This system is a bolt-on package that is designed to enhance traction by eliminating wheel hop and promoting weight transfer to the front wheels. Installation of this product requires the permanent removal of the factory plastic splash pan located just behind the radiator support. No other modifications are required for installation.
(more…)
Honda/Acura Traction System Installation Instructions
November 9th, 2009 · No Comments
OmniTrac Brake Control Installation Guide
July 24th, 2009 · No Comments
Drilling or use of longer screws may damage unit.
1. Securely mount bracket to a solid surface.
2. Insert supplied #6 x 3/8″screws on each side into the mounting holes.
3. Adjust control to desired position and tighten screws until snug.
4. Once the brake control is securely mounted, point the Internal Sensor Adjustment Arm down to the ground.
(more…)
