Automotive Manual PDF

This advance edition of the 2008 Ford RV & Trailer Towing Guide provides trailer towing weights for the listed early-introduction 2008 models. It is available only online for the benefit of customers ordering any of these models prior to the September printing of the complete Guide, which will include more detailed RV and towing information. Until then, this expanded information may be accessed through the 2007 RV & Trailer Towing Guide available online or in printed form (see your Ford Dealer).
(more…)

[Read more →]

Aluminum Wheel Refinishing Recommendations
• Chrome-plated aluminum wheels
Re-plating these wheels is not recommended.
• Polished aluminum wheels
These wheels have a polyester or acrylic clearcoat on them. If the clearcoat is damaged, refinishing is possible. However, the required refinishing process cannot be performed in the dealer environment. Refer to Refinisher’s Responsibility — Outside Company later in this bulletin.
(more…)

[Read more →]

SIR Disabling and Enabling Zone 3 Disabling Procedure
Important: Refer to SIR Service Precautions on page 1-1 in General Information before disabling the SIR system.
1. Turn the steering wheel until the vehicle’s wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
Important: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate an SIR system malfunction.
4. Remove the SIR fuse from the underhood fuse block.
5. Remove the connector position assurance (CPA) from the steering wheel module yellow 2-way connector located left of the steering column near the knee bolster.
6. Disconnect the steering wheel module yellow 2-way connector.
(more…)

[Read more →]

This handbook covers the current version of the Land Rover Discovery and, together with the Passport to Service, provides all the information you need to derive maximum pleasure from owning and driving your new vehicle.
For your convenience, the handbook is divided into sections, each dealing with a different aspect of driving or caring for the vehicle. The sections are listed on the contents page and you will find it worthwhile to take a little time to read each one, and get to know your Discovery as soon as you possibly can. The more you understand before you drive, the greater the satisfaction once you are seated behind the steering wheel.
(more…)

[Read more →]

When your car is parked, the gear selector is locked in the (P)ark position. To release the selector from this position, turn the ignition key to position II (or start the engine), depress the brake pedal, press the button on the top of the gear selector and move the selector from (P)ark. If it is necessary to manually override the Shiftlock system, see page 107 for instructions.
(more…)

[Read more →]

This handbook covers current Land Rover Defender models and, together with the Service Portfolio book, provides all the information you need to derive maximum pleasure from owning and driving your new vehicle.
(more…)

[Read more →]

This manual deals with the operation and care of your Volvo.
Welcome to the world-wide family of Volvo owners. We trust that you will enjoy many years of safe driving in your Volvo, an automobile designed with your safety and comfort in mind. To help ensure your satisfaction with this vehicle, we encourage you to familiarize yourself with the equipment descriptions, operating instructions and maintenance requirements/recommendations in this manual. We also urge you and your passengers to wear seat belts at all times in this (or any other) automobile. And, of course, please do not operate a vehicle if you may be affected by alcohol, medication or any impairment that could hinder your ability to drive.
(more…)

[Read more →]

This is how I installed my Eurojet Intercooler, hopefully its helpful to you.
Basic Steps
Removing the bumper fascia
Remove the bumper
Removing OEM intercooler and piping.
Install new intercooler, bumper and piping.
Trim and Re-install bumper fascia
(more…)

[Read more →]

I decided to start taking pictures only after having the clockspring fully disassembled, as in picture 2, so now I have to play them backwards I do not go into details on removing the airbag or the steering wheel, as there is plenty of material describing these steps. We start with the steering wheel off the car and the airbag disconnected and removed, as shown in picture 1. If you look at pic1, you will see three Phillips head screws and a soldered back and isolated cut in the horn wire, going down to the horn slip ring on the other side. To separate the clockspring assembly from the steering wheel you have to remove those three Phillips screws and either disconnect the horn wire connector, or just cut the wire right now. This will come in handy later, when you will want to separate the slip ring carrier from the assembly.
(more…)

[Read more →]

All of Öhlins advanced suspension products are adepted to the brand and model. This means that length, travel springaction and damping characteristics, are tested individually just for the vehicle that you have decided to fit with Öhlins suspension.
Before installation
Öhlins Racing AB can not be held responsible for any damage whatsoever to suspensionor vehicle, or injury to persons, if the instructions for fitting and maintenance are not followed exactly. Similarly, the warranty will become null and void if the instructions are not adhered to.
(more…)

[Read more →]