1. Take the kit out of the box and lay everything out. You can install either the ballasts or bulbs first but typically it is easier to install the bulbs first.
2. Remove the access cap from the rear of your headlight housing as shown.
3. Drill a hole in the center of the cap as shown. If you use a hole saw that will be all you need. If you use the small drill bit you will need to use your dremel to cut a 1″ hole. You may want to use some sand paper just to smooth the edges you have cut.
(more…)
Volvo 850 series, 1998-2000 S/V/70 and 1998-2004 HID conversion installation instructions
December 7th, 2008 · No Comments
Suzuki LTR 450 Fuelpak Fuel Management System
October 9th, 2008 · No Comments
Fuelpak maps for the LTR450 were created with a White Brothers Power Pro performance module installed. The included Power Pro unit must be used in conjunction with the Fuelpak for proper function. Failure to do so will result in poor performance and may cause engine damage.
(more…)
2002-04 Subaru WRX Aux-in Installation Manual
May 17th, 2008 · No Comments
Aux-in Accessory for 2002-04 Subaru WRX, & Impreza Radios (P-123)
Installation Instructions
First check that your package includes everything listed below for proper installation.
Package Contents:
- Aux-in Accessory Board
- 8″ 15-wire ribbon cable (plugged into board)
- Silent CD
- This installation manual
Throughout this install, there are steps that require the use of tools.
(more…)
